petrol cap

'To the point' advice on what fits what, parts interchangeability and simple solutions to common problems...
This forum applies to Hondas.
Keep your post brief. You may include 2-3 clear cropped photos (max 600 pixels wide)...
Post Reply
Posts: 76
Joined: Thu Jan 25, 2007 6:10 am
Location: kingscliff nsw

petrol cap

Post by shane » Sun Feb 11, 2007 1:45 pm

my chop's fitted with an old harley sporty tank with a screw down filler cap. any one know of an after market, lockable cap to suit?
goals always achieved,but not always the right ones set.

Posts: 651
Joined: Tue May 09, 2006 2:53 am
Location: Northern Sydney

Post by chopaweeza » Sun Feb 11, 2007 10:34 pm

Cut the filler out and weld in a replacement locking cap & neck out of a scrap jap tank. If you have a decent Mig or Tig it's pretty straight forward. There were a locking cap marketed for those style tanks but they actually didn't work .

Founder, Choppers Australia
Posts: 6016
Joined: Sat Oct 22, 2005 3:54 pm
Location: Willunga, South Australia

tank filler

Post by Prof » Mon Feb 12, 2007 12:43 am

If you don't have a decent welder, most small welding shops would do that amount of welding for $20. Use POR 15 to stop any leaks.
Chopit'nrideit... Prof

Post Reply

Return to “Fits'n Bits; Honda...”